Philips Saeco Exprelia Series, Service Manual

Page: 32 / 56

EXPRELIA 05 TROUBLESHOOTING
Saeco International Group Rev. 00 / June 2010 Page / 07
Software version
Keyboard
Brew Unit
(xx.yy.zz) • software version loaded onto the machine
(D and E) • are values providing information on the memory settings
and must be 64 and 8.
P OFF • : if active it enables immediately going onto Standby when the
machine is switched on
Debug msg: • if active it enables the automatic dosing debug messages
for the next restart only
This is the button test page: each beverage corresponds to a box on the
display that changes colour when the corresponding button is pressed (e.g.:
ESPRESSO)
This screen corresponds to the management of the area inside the front hatch.
02
UNIT BREW
Home mA: xx Work
Stop
DDr H/W
Dreg- Dreg+
10
Door Pres
KEYBOARD
Caf
Cappucc Espr
Long
Clean Stdby
Spec
*
* * * *
xx.yy.zz
Software
P Off
Debug msg
E:8
D:64
*
* *
*
* *
*
Operation:
WORK • : if pressed, switches the unit into its work position
STOP • : if pressed, stops the unit instantly
HOME • : if pressed, switches the unit into its Home position
DREG UP • : increases the coffee dregs counter
DREG DOWN • : decreases the coffee dregs counter
Indicators:
mA • : indicates moment by moment the maximum current (in mA)
consumed by the unit when moving. Its value must not exceed 300 mA
H/W • : becomes active (illuminated) when the unit reaches a “Work”
position
Pres • : if active, this indicates that the unit is inserted
DDr • : if active, this indicates that the dregs counter is inserted
Door • : if active, this indicates that the front hatch is closed