4
Revison 06/2014
Copyright © 2014, Fast ČR, a. s.
EN
PART 3: INSTRUCTIONS FOR USE
Before fi rst use
1) Wash all detachable parts in warm water and dry them completely.
2) Place the juicer on a stable, even surface that is not slippery.
3) Plug the power cord into an appropriate electrical socket (220-240 V).
Assembling the product
1) Insert the pulp container into the juicer as shown in the illustration.
Make sure that the edge of the collector is even with the motor unit.
2) Insert the stainless steel strainer into the collector. Make sure that the strainer
is fi rmly seated on the drive shaft. When properly placed, the upper edge of
the strainer should be below the level of the upper edge of the juice collector.
3) Cover everything with the lid and press it down into the proper position.
