Philco PDA 870, User Manual

Page: 16 / 112

EN - 14
04/2011
2011
1. Open the compartment by turning the lid in the direction of the arrow "open" (to the left) and taking it off .
2. Pour the rinsing aid into the compartment and take care not to overfi ll it.
3. Place the lid back on and tighten it by turning it in the direction of the arrow "closed" (to the right).
NOTE
Wipe any spilled rinsing aid with a wiping cloth, so that excessive suds are not formed in the
following wash. Do not forget to put the lid back on before closing the dishwasher door.
Rinsing aid compartment
Setting dial
(rinse)
The rinsing aid compartment has four or six diff erent settings (depending on the model). Always start with the
setting at "4". If stains form on the dishes or if there is a problem with drying the dishes, increase the released
amount of the rinsing aid by removing the lid and turning the dial to "5". If despite this step the dishes are not
without stains after drying, adjust the setting again to a higher level until the dishes are clean after drying. The
recommended setting is "4".
(The value set by the manufacturer is "4".)
NOTE:
If there are water drops or scale stains on the dishes after the wash, increase the dosage. If there are
white stains or blueish layers on glasses or knife blades, lower the dosage.