Philco PDA 870, User Manual

Page: 30 / 112

EN - 28
04/2011
2011
Dishwasher care
You can clean the control panel using a light damp wiping cloth. Thoroughly dry the area after cleaning.
Clean the exterior parts of the dishwasher using a quality polish.
Never use any sharp items, steel wool or coarse, sandy cleaning products to clean any part of the dishwasher.
Cleaning the door
To clean the door edges use a soft, warm, damp wiping cloth. To prevent water leaking into the door lock or its
electronic parts, do not use any cleaning agents in sprays.
WARNING!
•
Never use cleaning agents in sprays to clean the dishwasher door because this could damage
the door lock and electrical parts.
• Do not use sandy cleaning agents or certain types of kitchen paper towels, because they could
scratch or leave marks on the stainless steel parts of the dishwasher.
Protection against frost
In winter take steps against the dishwasher freezing. After every wash do the following:
•
Disconnect the dishwasher from the power source.
• Close the water inlet and disconnect the supply hose from the water valve.
• Drain water from the water supply hose and the water valve. (Drain the water into a container.)
• Reconnect the water supply hose to the water valve.
• Take out the fi lter on the bottom of the dishwasher and using a sponge suck up the water from the waste
tank.
NOTE:
If your dishwasher is not working because it has frozen, contact an authorised service technician.