Philco PDA 870, User Manual

Page: 11 / 112

EN - 9
04/2011
2011
Draining water
• Connect the drain hose. The drain hose must be properly attached so that water does not leak. Check that
the hose is not knotted up or pinched.
Extending the hose
• If you need to extend the drain hose, you must use the same type of drain hose.
• The hose must not be longer than 4 meters. Otherwise the effi ciency of the dishwasher would be reduced.
Connecting the drain hose
You must connect the drain hose at a height from 40 cm (minimum) to 100 cm (maximum) from the bottom
part of the appliance. Secure the drain hose using a clamp. The loose end must not be submerged in water.
Turning on the dishwasher
Before turning on the dishwasher, check the recommendation below.
• The dishwasher is levelled and properly seated.
• Is the inlet valve opened?
• Joints do not leak in the connection points.
• Cables are properly connected.
• Is the power source turned on?
• The water supply hose and the drain hose are not knotted up.
• You have removed all packaging material and all printed materials.