Philco PD 1251 BiT, User Manual

Page: 4 / 116

EN - 2
10/2012 Copyright © 2012, Fast ČR, a. s.
PART 1: BEFORE PUTTING INTO OPERATION
Important safety instructions

Read carefully and store for future use.

The safety of this appliance complies with industry norms and meets legal appliance safety requirements.
However, as manufacturers, we consider it our duty to provide you with the following safety instructions.

It is essential that you store this user's manual in a safe place so that you can use it in the future.
If you intend to sell the appliance, give it to another owner, or if you move, always make sure that the user's
manual is attached to the appliance, so that the new owner can fi nd out about the operation of the appliance
and the relevant warnings.

Before installation or operation of the appliance you MUST carefully read all the safety instructions
and the user's manual.

Before putting the appliance into operation for the fi rst time, check that it has not been damaged during
transport.

If the appliance is supplied in the winter months, when the temperature falls under 0°C, store the appliance
at room temperature for 24 hours before fi rst use.

This dishwasher is designed for washing household dishwasher-safe dishes. Use the dishwasher only for the
purposes for which it was designed.
The dishwasher is designed for a maximum of 12 sets of dishes!

This appliance must not be used by any persons (including children) with mental disabilities, weak strength
or by inexperienced persons, unless they have been properly trained or schooled in the safe use of the
product,or unless they are properly supervised by a qualifi ed person who is responsible for their safety.

Children must be supervised to ensure that they do not play with the appliance.
Installation

Check that the dishwasher has not been damaged during transport. Never connect a damaged appliance.
If the dishwasher is damaged, contact the supplier.

It is necessary to remove all packaging from the dishwasher before it is used. Dispose of the packaging
materials in a proper manner. Do not allow children to play with the packaging material. There is a danger
of suff ocation!

The electrical and plumbing installation necessary for the connection of this dishwasher may only be
performed by a person with relevant qualifi cations.

Maximum permitted water pressure is 1 Mpa. Minimum permitted water pressure is 0.03 Mpa.

Connect the appliance to the water source using a new hose, do not use a used hose.

The power cord must not be excessively or dangerously bent or pressed during the installation.

For safety reasons, changing the technical parameters, or making any other modifi cations to the appliance
is dangerous.

Never use the dishwasher, if the electrical connection or the water hose are damaged, or if the control
panel, workbench or its support is damaged, when the inside of the appliance is freely accessible. Contact
a local service centre to avoid exposing yourself to possible dangers.

You must not drill into any side of the dishwasher so that you do not damage the plumbing and electrical
components.

Do not turn on your dishwasher until all covers are properly installed.
WARNING!
When using the dishwasher follow all the notices below.