Philco PD 1251 BiT, User Manual

Page: 19 / 116

EN - 17
10/2012 Copyright © 2012, Fast ČR, a. s.
Dosage of the dishwashing detergent
1. Release the clip to open the dishwashing detergent compartment.
2. Place the required amount of dishwashing detergent into the main wash detergent compartment (if you
are using a dishwashing powder). Make sure that the amount of the dishwashing detergent is between the
MIN and MAX level lines.
3. If the dishes are overly soiled, also add dishwashing detergent into the pre-wash partition.
4. Close the dishwashing detergent compartment.
5. Now turn on the dishwasher.
NOTE:
The mark „MIN” in the main wash detergent compartment corresponds to approximately 20g of
dishwashing detergent. The pre-wash detergent compartment will take approximately 5g of dishwashing
detergent.
Follow the recommended dosages and storage indicated by the manufacturer on the packaging of the
dishwashing detergent.
Close the lid and press it down until it clicks in.
If the dishes are heavily soiled, also add dishwashing detergent into the pre-wash compartment. This dose will
be used during the pre-wash phase of the wash.
NOTE:
You can fi nd the information about dishwashing detergent dosages in the washing program table.
Keep in mind that the results may diff er depending on the degree of soiling and hardness of the water
used.
Follow the manufacturer's recommendations on the dishwashing detergent package.