Philco PD 1251 BiT, User Manual

Page: 13 / 116

EN - 11
10/2012 Copyright © 2012, Fast ČR, a. s.
PART 4: CONTROL PANEL
Control panel
1. 2. 3. 4.
1. Power button (ON/OFF) Turning on/off power to the appliance. After turning on, the Start/Pause indicator
light will come on.
2. Program selection button: press the button to select the desired program.
3. Delayed start button: the washing program can be postponed by 3, 6 and 9 hours. Repeatedly press the
delayed start button (Delay) to select the length of the delay until the dishwasher is started. To activate the
function press the Start/Pause button.
If you wish to change the set time, press the Start/Pause button and then set a new value for the delayed
start. Reconfi rm using the Start/Pause button.
If you press the delayed start button when the time is set to 12 hours, the delayed start indicator light will
turn off . If at this time you press the Start/Pause button, the program will start.
You can check the set delayed start value by looking at the control lights. For example, if you set 9 hours,
the indicator lights 6 h, 3 h will gradually light up.
4. Salt warning indicator light: It will light up if salt needs to be refi lled.
Rinsing aid warning indicator light: It will light up if rinsing aid needs to be refi lled.
The warning indicator lights will turn off during the washing cycle or when using 3-in-1 tablets even if the
amount is insuffi
cient.
End of program indicator light : as soon as the washing program fi nishes, the end of program indicator
light will be lit. At the same time a sound will be made 5 times.
NOTE:
The washing program that was set previously will remain in the dishwasher‘s memory. Before turning
on the dishwasher again, check that you have selected the correct washing program.
Child lock function
To prevent buttons from being pressed accidentally, it is possible to activate the child lock function. Hold down
the Start/Pause and delayed start buttons at the same time for 4 seconds. The 3 h indicator light will fl ash once.
To cancel the child lock function hold down the Start/Pause and delayed start buttons at the same time for
4 seconds. The 3 h indicator light will fl ash twice.