EN -
08/2015
Copyright © 2015, Fast ČR, a. s.
Washing detergent remains in the detergent compartment.
•
The washing detergent was wet.
Water is inside the dishwasher at the end of a program.
•
The drain hose is clogged or tangled.
•
The fi lters are clogged.
•
The program has not fi nished yet.
The dishwasher stopped during operation.
•
Power supply was cut off .
•
Water supply was cut off .
•
The program was manually interrupted.
A clapping and banging sound coming out of the dishwasher.
•
The dishes are incorrectly arranged.
•
Water from the jets is not washing the dishes.
Food remains on the dishes.
•
Dishes were incorrectly arranged and so water could not reach certain areas.
•
The rack was overfi lled.
•
The dishes were touching each other.
•
Not enough dishwashing detergent.
•
An inappropriate program was selected.
•
The jets are clogged.
•
The fi lters are clogged.
•
The fi lters are incorrectly fi tted.
•
The water draining pump is clogged.
There are whitish stains on the dishes.
•
Not enough dishwashing detergent.
•
The rinsing aid is set to a low level.
•
Incorrectly set water hardness.
•
Incorrectly set water softener.
•
The cap on the salt compartment is not fully closed.
The dishes are not dry.
•
You selected a program without drying.
•
The rinsing aid is set to a low level.
•
You took the dishes out too soon.
Rust remains on the dishes.
•
The quality of the stainless steel dishes is insuffi
cient.
•
High salt concentration in the water.
•
The cap on the salt compartment is not fully closed.
•
Too much salt was released into the dishwasher while the compartment was being fi lled.
•
Incorrect grounding.
If the problem persists, turn off the dishwasher, disconnect the power plug from the socket.
