EN - 2
08/2015
Copyright © 2015, Fast ČR, a. s.
Settings menu
To enter the settings menu, hold down the selection and delayed start buttons for approximately 3 seconds.
The message "Keep Pressing..X" (Keep pressing..X) will appear on the display, indicating how many more
seconds you need to hold down the button. When a zero is shown on the display, the settings menu will
appear. You may scroll through the menu using the up/down buttons. To exit the menu, you can press and hold
down the selection and delayed start buttons for 3 seconds, the same way as when you entered the menu,
or select the last item in the menu and confi rm with the confi rm button.
The menu contains the following items.
1. Language
2.
Water
hardness
3. Volume
4. Brightness
5. Eco mode
6. Reset to factory settings
7. Energy savings
8. Exit the menu
1. Language settings
After entering the settings menu, use the up/down buttons to select a language. Message (1. Language: X), will
appear where "X" is the current language. Then press the confi rm button to activate the language selection
and then select a new language, save it by pressing the confi rm button again. Available languages:
English
Turkish
French
German
Italian
Greek
Croatian
Russian
Finnish
Norwegian
Dutch
Swedish
Danish
Spanish
Portuguese
Polish
Čeština
Slovenian
Hungarian
2. Water hardness settings
Setting water hardness is described in a previous chapter (page 15).
3. Volume
You can set the sound of the dishwasher signal sounds. After entering the menu, select "3-Volume" (Volume)
using the up/down buttons. The display will show "Volume: X” (X:L1,L2,L3 ). L1 is the quietest, L3 is the loudest.
After pressing the confi rm button you activate "X", select the respective volume level and save the selection by
pressing the confi rm button again.
4. Brightness
You can set the brightness level of the dishwasher display. After entering the menu, select "4-Brightness"
(Brightness) using the up/down buttons. The display will show "Brightness: X" (X:L1,L2,L3 ). L1 is the darkest, L3
is the lightest. After pressing the confi rm button you activate "X", select the respective display brightness and
save the selection by pressing the confi rm button again.
5. Eco mode
This button makes it possible to reduce power consumption by reducing the brightness of the display, whereby
it is turned off after 30 seconds of inactivity. After entering the menu, select "5-Eco mode" (Eco mode) using
the up/down buttons. The display will show "Eco mode: X” (X:YES or NO). After pressing the confi rm button you
activate "X", you can use the dishwasher with the eco mode activated or deactivated.
