EN - 2
08/2015
Copyright © 2015, Fast ČR, a. s.
Delayed start: (Standby mode)
You may delay the start of a selected cycle by up to 24 hours. Once the wash cycle starts, it is not possible to set
a delayed start. In order to set the delayed start function, the wash cycle must not be started.
1. Press the delayed start button (5).
2. Time digits "00:00" will appear on the information display and the delayed start indicator (18) will start to
fl ash.
3. Set the delayed start time using the up / down buttons (7, 8). The up button (7) serves to increase the value
by 1 hour, whereas the down button (8) reduces the value by 1 hour. Pressing the start / pause button
will start the countdown of the set time. The delayed start indicator (18) will remain lit while this time is
counting down. The remaining time / delayed start indicator (19) displays the duration of the delayed start.
When the countdown is fi nished, the selected program will start. The display will show the time remaining
until the end of the wash cycle.
Changing a program or function in the delayed start
Press the start / pause button to pause operation, the countdown will stop and the display will show "program
paused" (Program is paused) and "Delay timer active" (Delayed start timer is active). If you press buttons
without fi rst pausing operation, a warning message will be shown like "Delay timer active" (Delayed start timer
is active) or "invalid" (Invalid step). After pausing operation, you may select a new wash program and add an
additional function as described in a previous part of the user's manual.
Pressing the start / pause button will start the countdown of the set time.
If you wish to cancel or to set a new time while the delayed start function is activated (countdown phase).
If you need to adjust the delayed start time, pause operation by pressing the start / pause button. Press the
delayed start button to enter the settings menu; set a new delayed start time using the up/down buttons. Press
the start / pause button to start counting down the newly set delayed start time.
If you wish to cancel the delayed start, press and hold the start / pause button for about 3 seconds. The message
"Program Cancelling...X" (Program will be cancelled in ...X) will appear on the display, where "X" indicates how
many more seconds you need to hold down the button. X". This will cancel the delayed start.
Warning messages
During operation the dishwasher displays messages.
1. Make sure that water supply was not interrupted
2. Make sure that the water inlet valve is open
3. If the above described is in order, please contact an authorised service centre.
Whenever a malfunction occurs that you cannot remedy yourself, the above message will always appear.