Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678
www.phihong.com or www.midspans.com
-62-
Appendix C: Frequently Asked Questions
Q
: What happens if I forget my username and passwords for the NIC Interface?
A
: Please contact Phihong Sales for further information on this topic.
Q
: What is the function of the “current share” pin on the CD Power connector? Are there any protocols
or procedures associated with it?
A
: The DC solution contains 3x 500W 50V rectifier modules (1000W N+1) with custom cables available
for connection between the rectifier rack and up to 4 midspans. The current share pin is an option
which could be used to have the power supply inside the midspan current share with the rectifiers.
There are no protocols or procedures associated with it other than it’s designed only to work with
our rectifier system and even then its not perfect sharing due to the inrush limiting components
inside the midspan located on the DC input.
Q
: What type of Display Properties settings are required to run the Phihong SMNP v3 GUI?
A
: 16-Bit: 1024 X 768 pixels, 1280 X 1024 pixels
32-Bit: 1024 X 768 pixels, 1280 X 1024 pixels
If the settings are set to be at least the values shown below, the edges of the GUI window will be
cropped.
16-Bit: 640 X 480 pixels, 800 X 600 pixels
32-Bit: 640 X 480 pixels, 800 X 600 pixels
Q
: My ports status information is taking a long time to load while I have SSL Enabled, Is there something
wrong?
A
: No. With SSL enabled users may experience delays in loading their information. This is to allow time
for the appropriate security certificate identification and validation.
