Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678
www.phihong.com or www.midspans.com
-40-
1.3.6.1.24852.2.2.15.0
poeSystemControlBothPower***
INTEGER
Read-Write
Sets the value of
the total available
power in Watts to
be supplied by both
power sources
1.3.6.1.24852.2.3.1.1.1~24
poePortIndex
INTEGER
Read-only
A unique value for
each port.
1.3.6.1.24852.2.3.1.2.1~24
poePortPowerEnable
INTEGER
(1.2147483647)
Disable (1)
Enable (2)
Setting this
object at a value
enable (2) enables
the detection
mechanism for this
port.
Setting this object
at a value disable
(1) disables
the detection
mechanism for this
port
1.3.6.1.24852.2.3.1.3.1~24
poePortControlMaxPower***
INTEGER
Read-Write
This command
specifies the max.
power in watts to
the port
.6.1.4.1.24852.2.3.1.4.1.0
poePortCurrentStatus***
INTEGER
undercurrent (1)
overcurrent (2)
both (3)
ok (4)
Describes a current
port status related
to the power gen-
eration, the value
undercurrent (1)
indicated that the
port current is
below the minimal
value since the
attribute was last
cleared. The value
over current (2)
indicates that the
port exceeds the
maximum value
since the attribute
was last cleared.
The value both
(3) indicates that
both undercurrent
and over current
since the attribute
was last cleared.
The value ok (4)
indicates neither
an undercurrent
or an overcurrent
condition has been
detected since
the attribute was
last cleared. This
attribute is cleared
through the power-
Portcurrentstatus-
Clear Action.
