15
© 2018 Phase Holographic Imaging PHI AB | All rights reserved |
|
6 CONNECTING THE USB CABLE
•
Connect a
USB cable
in the micro USB con-
nector.
•
Connect the USB cable to your computer.
7 CONNECTING POWER
•
Connect the
Main unit power cable
to the
power connector. Make sure the connector is
in the correct position before tightening the
lock ring.
•
Connect the power cable to a power outlet.
8
ATTACHING THE VESSEL HOLDER
HoloMonitor with motorized stage is deliv-
ered with three different vessel holders, for
microscope slides, standard multi-well plates
and for standard Ø 35 mm Petri dishes.
To ensure that the vessel is correctly fitted on HoloMonitor; first attach the cell culture
vessel to the vessel holder, then attach the vessel holder to the stage by clicking it on from
the side, as seen in the image blow.