51
© 2018 Phase Holographic Imaging PHI AB | All rights reserved |
|
Size
specifies image width and height in µm.
Light effect
applies an artificial light source to the image which may sometimes
render an improved image.
Shiny surface
shows the rendered surface with a reflective visual effect.
Shiny
surface
is only active when
Light effect
is checked.
Change the image coloring
All holographic images will appear in gray-scale. Use the
Coloring panel
, which is found to
the left of the
View area
, to add pseudo coloring to the images. The colors that are applied
will color the image relatively to the thickness of the cells. For additional information on
how to set the coloring see
Move, flip or zoom the cell image
•
To zoom the cell image in the
View area
, move the mouse cursor to the view area, click
and scroll using the scroll button on the mouse.
•
To move the cell image to a desired location, click, hold and drag the image using the left
mouse button.
•
To flip and move a holographic 3D image, click, hold and drag the image using the right
mouse button on the image.
RE-FOCUS A CAPTURED IMAGE
After image capture most images are well focused. Some images may need to be re-focused
manually after capture. If an image is not correctly focused, as in the example below, re-
calculating the software focus may restore focus.