Creating a new Security Code
You can create – or change – the security code on the IQ4 by selecting
Menu
> Security Settings > Security Code
.
Enter the new four-digit code by tapping on the desired numbers on the touch
screen and press on the green checkmark icon to accept it.
Recovering a locked IQ4
You have up to ten attempts to enter the correct security code after which the
IQ4 will be locked. This is done to ensure against usage after for example theft.
If you are locked out of the IQ4 after ten failed attempts, you will need to
contact Phase One Support in order to regain access. The IQ4 will show a
security key that you have to provide to Phase One support in addition to the
serial number of the IQ4; they will then guide you through the process to
unlock the IQ4 will a special code.
Tethering Access Code
It is possible to restrict tethering access to the IQ4 by setting an access code
that needs to be entered in Capture One Pro before gaining access and
control of the back. You can set whether this access code should be in e
ff
ect
for USB-C and/or IP (Ethernet and Wifi) connections separately. This feature
needs Capture One 12.0.2 or later.
Select
Security Settings > Edit Host Access Code
and enter a four-digit code.
Tap on the green checkmark to enable the code.
Then select
Security Settings > USB Authentication
and
Security Settings >
IP Authentication
and set one of them or both to
On
.
It might make sense to have USB Authentication set to O
ff
and IP
Authentication to On, if you are shooting tethered via USB-C but want to
ensure that others can’t gain access to your IQ4 over WiFi (or remotely via an
Ethernet connection).
Once the Host Access Code is enable, Capture One Pro will prompt you to
enter the code when you try to gain access to the IQ4:
Capture One will remember the entered password even after you have
disconnected the IQ4 or restarted the software. This is by design to ensure
that you don’t have to enter the same code several times during a busy shoot
where you might want to run tethered capture on and o
ff
.
This also mean that you will have to change the Host Access Code if you want
to ensure that new users of Capture One
on your computer
are prompted for
an access key.
57
Security Settings
57
XF IQ4 Camera System Manual |
