System Setup has been saved to the XQD card
Loading the System Setup from a XQD card
You can choose to keep certain
settings during a Restore to Default
Save and Load System Setup
You can easily make a backup of the entire System Setup to the memory card.
This backup will include all of your settings on the XF Camera, your Custom
Setups, as well as all of the settings on the IQ4.
The feature makes it easy to quickly load your preferred settings if you
frequently share the XF IQ4 Camera System with other photographers. It is
also a convenient way to quickly be able to reuse all of your settings if you
often rent an XF IQ4 Camera System.
The backup file is called XFSystem.set and is stored at the root of the memory
card. From there, it can be copied to your computer for further backup or
sharing. Note that the file will get erased if you format the memory card.
Save System Setup to XQD or SD Card
The backup of the System Setup is done from the IQ4. Select
IQ4 Menu >
System Settings > Save/Restore System Setup
, then select either
XQD
or
SD
,
and finally
Save Setup to XQD
(or
SD
) and press the check mark to accept.
The system will now confirm that the System Setup of both the IQ4 and XF
Camera has been saved to the XQD (or SD) card. If the XF Camera Body is not
attached to the back, only the IQ4 settings will be stored.
Load System Setup from XQD or Sd Card
To load your saved System Setup, select
IQ4 Menu > System Settings > Save/
Restore System Setup
, then select either
XQD
or
SD
, and finally
Restore Setup
From XQD
(or SD) and press the check mark to accept. You will need to turn
the system o
ff
and back on before all the changes are applied. If there is no
valid backup file present on the XQD card, you will get a warning.
Restore to Default
You can easily restore all of the settings to the default values. This is done
from the IQ4 Menu, selecting
System Settings > Restore to Default
. As a
convenient feature, you have the option to choose whether Custom White
Balance values and Network Setup should be reset or kept during the restore.
Select only those you want to reset to default values, and press the check
mark to accept. This feature makes sure that you do not have to reenter some
common settings each time you need to restore the system to default settings.
NOTE:
Settings like Focus Trim and HyperFocal focus values are stored as part of the System
Setup backup and will be applied if you save and load the System Setup on the same
XF Camera Body. However, they will not be applied if you load the System Setup onto a
di
ff
erent XF Camera. The reason for this is that Focus Trim and HyperFocal focus values
have to be setup individually for each camera system in order to work correctly.
120
XF Custom Presets and IQ4 Backup
XF IQ4 Camera System Manual |
