Operating Instructions & Parts Manual
Page 5
Adding
Oil
to
the
Dashpot
If when moving the Load/Unload handle and you feel it make fast hard contact or
hear a suction noise then its time to check the dashpot.
On the left side of the machine (when standing in front of it) there is a small metal
access plate held on by 2 small screws. Remove the screws and plate to expose the
valve and reservoir.
Push the Load/Unload handle towards the back of the machine. Remove the screw
#25 and carefully add high grade hydraulic oil into the hole.
Begin pulling/pushing the Load/Unload handle back and forth until any suction
noise has disappeared.
Replace screw #25. Replace access plate.
25
24
23
22
Dashpot Adjuster/Filler
