55
Phantom Flex Manual
54
Phantom Flex Manual
Attaching a CineMag
The CineMag clips into the MagMate
of the Phantom as shown in the illustration.
All of the power and data connections
are made between the pins on the MagMate
and the pads of the CineMag.
Please be careful when attaching or
removing the CineMag that you don’t
damage the pins on the camera.
Avoid dragging the tabs on the front
of the CineMag across the pins.
Removing a CineMag
To remove the CineMag,
pull the red tab on the back
of the camera and lift the mag,
being sure not to damage
the pins on the camera.
There have been two generations of CineMags.The newer CineMag II is thin-
ner and lighter than the first generation CineMags.The functionality of the
two is identical.
When the erase-protect switch is in the lock position, the CineMag cannot be
erased. Recording to the mag is still possible. It is recommended to enable
this switch when you begin shooting to avoid accidentally erasing a CineMag
CineMag and CineMag II
The Erase Protect Switch
Summary of Contents for Flex
Page 1: ...MANUAL ...
Page 2: ...MANUAL New York Chicago Los Angeles First Edition 09 20 10 www abelcine com ...
Page 52: ...94 Phantom Flex Manual ...
Page 53: ......
