FT Silomat E 140
(VAE)
Operating Instructions
05.2008
Knauf PFT GmbH & Co. KG
3
Dear PFT customer,
Congratulations on your purchase. You have made a wise choice in valuing the quality that comes
with a brand name product from a reputable company.
The conveying system
PFT SILOMAT E 140 VAE
is state of the art. It has been designed in such
a functional manner as to be a reliable aid in rough construction site conditions.
These operating instructions should always be stored and kept at hand at the site where the
machine is used. They contain information on the various functions of the machine. Study the
operating instructions thoroughly before starting the machine, as we accept no liability for
accidents or damage to the machine caused by incorrect operation.
If operated correctly and handled with care, the conveyor system
PFT SILOMAT E 140 VAE
will be a trusty helper.
It is prohibited to forward this document, even excerpts, without our written authorisation. All
technical specifications, diagrams etc. are subject to copyright law. All rights, errors and
modifications are reserved.
Initial inspection after delivery
A vital task for all technicians delivering the conveying system
PFT SILOMAT E 140 VAE
is the
inspection of the machine settings at the end of the first cycle. The factory settings may change
during the initial cycle. If these changes are not corrected in time – immediately after start-up –
malfunctions may well be the result.
After delivering the conveying system
PFT SILOMAT E 140 VAE
and giving appropriate instruc-
tions – i.e. after about two hours – the technician must always carry out the following checks /
settings:
¾
Pressure
control
¾
Level
sensor
¾
Connection
cable
¾
Fuses
¾
Plug
connections
It is prohibited to forward this document, even excerpts, without our written authorisation. All technical
specifications, diagrams etc. are subject to copyright law. All rights, errors and modifications are reserved.
© by Knauf PFT GmbH & Co. KG