FT Silomat E 140
(VAE)
Operating Instructions
05.2008
Knauf PFT GmbH & Co. KG
16
Turn the main reversing switch (8) to
“0”
.
Observe the pressure display at the compressor!
Check if the pressure hose is depressurized.
The pressure display is at
“0”
.
Move the motor and drive to the position
“FLAP CLOSED”
by turning the
hand wheel (9).
Close the silo outlet flap (11).
Turn the hand-0 automatic switch (5) to the
“HAND”
position.
Turn the main reversing switch (8) to the
“I”
position.
Press the operating switch (6)
ON
.
Blow the conveying container until it is empty.
Turn the main reversing switch (8) to the position
“0”
.
Otherwise, proceed as described on page 17, points 13 to 16.
Cleaning emulgator filters: The pressure display indicates there is
pressure!
Turn the main reversing switch (8) to
“0”
.
Turn the hand automatic switch to
“Hand”
.
8
9
8
11
5
6
8
5