FT Silomat E 140
(VAE)
Operating Instructions
05.2008
Knauf PFT GmbH & Co. KG
14
Material that is difficult to convey
NOTE
For material that is not easy to convey (e.g. outside plastering), the
conveying air must be set optimally using the taps.
By slightly opening the tap leading upwards, part of the air is directly led into
the outlet of the conveying container (bypass system) and supports the
conveying of the material.
Rule of thumb:
The heavier the material, the more the tap of the upwards leading air line
must be opened.
Measures to be taken when work is finished or interrupted
¾
Switch off the system by pressing the red pressure switch (7) “OFF”.
¾
Turn the hand automatic switch (5) to the position “0”.
¾
Turn the main reversing switch (8) to the position “0”.
¾
Disconnect the electrical cables and hoses.
WARNING!
When doing any kind of work on the SILOMAT E, you should make sure that
the conveying system is depressurized and de-energized.
Freeing the system of voltage
Turn the main reversing switch (8) to the position “0”.
When working on the control box, the power supply must be interrupted by
removing the connection cable (10).
5
7
8
8
10