PFT SILOMAT E 140 VAE Operating Instructions Manual Download Page 21

FT Silomat E 140 

(VAE)

 Operating Instructions        

                                                           05.2008 

Knauf PFT GmbH & Co. KG  

21 

Accessories 

You can find further accessories in the internet under www.pft.de or at your building machinery dealer’s. 

 

PFT external vibrator SR 22, 400V (item number 20 70 80 00) 

The external vibrator is screwed on to the silo / container and connected to 

the control box. The vibrator’s control is installed in the control box.

 

 

 

PFT bag filling hopper (item number 20 70 61 00) 

The bag filling hopper is screwed on to the conveying container. It is for 

filling the system with bagged material.

 

 

 

 

PFT bypass for conveying air (item number 20 56 61 00) 

The bypass helps to improve the flow of material which is difficult to convey.

It is connected in the pressure line between the conveying container and the 

cleaning machine.

 

 

 

 

PFT hose attachment turning band (item number 20 65 40 00) 

The turning band relieves the conveying hose of tractive force when it is laid 

vertically and fixes it onto, for example, the frame. 

 
 
 

Summary of Contents for SILOMAT E 140 VAE









































Reviews: