PFT LOTUS XL light 400 V Overview – Operation – Spare Parts Lists
Maintenance
36
2017-01-16
Electrical system
DANGER!
Danger of death due to electric current!
Contact with live components can lead to death
or serious injury. Live electrical components can
move uncontrollably and cause serious injury.
Therefore:
– Before starting work, switch off the electrical
power supply and secure it against being
switched back on again.
Environmental protection
Observe the following environmental protection guidelines when
carrying out maintenance work:
Remove used, leaking or excess grease from all manual
lubrication points and dispose of it correctly according to the
applicable local regulations.
Collect used oil in suitable containers and dispose of it according
to the applicable local regulations.
29.2 Cleaning
The material hopper can be cleaned using a water hose once
all material has been removed.
CAUTION!
Water can enter sensitive machine parts!
– Before cleaning the machine, seal all openings
where water could enter and impair the safety
and functions of the machine (e.g. electric motors).
– Remove all coverings completely after cleaning.
29.3 Maintenance plan
The next sections describe the maintenance tasks required
for optimal, problem-free operation.
Provided no increase wear can be identified during regular
inspections, reduce the required maintenance intervals as
appropriate for the actual signs of wear.
For questions regarding maintenance tasks and intervals,
contact the manufacturer (see service address on page 2).
Interval
Maintenance task
To be performed by
Daily
Clean/replace the dirt trap sieve in the water inlet
Operator
Weekly
Clean/replace the sieve insert in the water inlet
Operator
