Operating Manual DTS and DTI 6201C / 6301C Multi-Controller (MC) 086100016 © Pfannenberg GmbH
Page 29 / 43
GB
Menu settings
4.4
Operation of the cooling unit
• After connection of the mains voltage, the device switches to startup/test mode or directly to operating mode.
The controller equipment determines which mode is activated.
• In operating mode the cooling unit switches to cooling mode as needed. This takes place depending on whether
a temperature switching threshold (TSet) is reached or undercut.
Cooling mode switches off when the temperature switching threshold (TSet) is undercut. It continues running if
the temperature switching threshold (TSet) has not been reached yet.
The evaporator fan (internal), condenser fan (external) and compressor switch off when the door is opened.
NOTE
Condensate flowing back
into the
switch cabinet can damage the electronic components
Internal temperatures below the dewpoint or damaged switch cabinet seals cause excessive accumulation of
condensate.
Regular inspection of the seals assures protection against heavy condensate accumulation.
Ensure that the accumulating condensate can drain freely.
Unit menu
Temperature
display
Error
1s
1s
1s
Start-up mode
Energy mode
Stop mode
Error number
Actual
value
Status
Error
Display
Input
mode
Value °F
Value °C
Save
parameter
Do not save
parameter
Password menu *
30 seconds without input
Back to the temperature display
Status
Actual
value