Operating Manual DTS and DTI 6201C / 6301C Multi-Controller (MC) 086100016 © Pfannenberg GmbH
Page 24 / 43
GB
Cooling unit electrical connection
Item
Designation
Item
Designation
1
Connecting plug
2
Cage terminal - max. 3.5 x 3.0 mm
3
Screwdriver (slotted)
4
Cable - 0.5
– 2.5mm²
Requirement
-
All general requirements for safe and reliable operation are assured; see
Mains supply connection
-
The cooling unit is de-energized.
Procedure
Connect the cable (4) with the connecting plug (1)/(accessory kit) as specified in the electrical circuit diagram;
see
Electrical connection.
For electrical connection, insert the screwdriver (3) into the cage terminal (2) and connect the cables (4) to the
cooling unit with the connecting plug (1).
Insert the screwdriver firmly into the cage terminal (2). Never twist the screwdriver; otherwise the cage terminal
(2) will be damaged.
Before switching on, ensure that the mains voltage matches the upstream fuse; see
Electrical connection.
The cooling unit is connected electrically.
1
3
2
4
Figure 15 - Cooling unit plug connection
1
2
3
4
