Adjustment
7
Fine adjustment
●
Switch on the machine.
●
In the input mode, select parameter "
608
", see Chapter
11
.
03
Parameter input in the
instruction manual.
●
If necessary, enter the access code, see Chapter
11
.
04
.
01
Entering the access code in
the instruction manual.
●
With the corresponding
plus/minus key
move the work clamp drive unit in accordance
with
requirement
1
, also see Chapter
11
.
03
Parameter input.
●
Switch off the machine.
●
Remove adjustment gauge
1
.
●
Fit the lower feed plate and work clamp holder.
If, during the fi ne adjustment, the setting is
±
5
increments above or below the
value in X- and Y-direction, the setting should be checked again in accordance
with
requirement
2
.