Adjustment
29
Fig. 1 - 23
1
.27
Work clamp initiator
Requirement
When the work clamp is lowered and shortly before lever 5 in the machine arm touches
stop 6, the initiator should switch on (input "3" parameter "601" is positioned at "off").
●
Switch on the machine and press the "
TE
" key.
●
Lower the work clamp by pressing the "
tacting forwards
" key.
●
With the clamp in this position, press the "
TE
" key.
●
In the input mode, select parameter "
601
", see Chapter
11.03 Parameter input
in the
instruction manual.
●
Select input "
3
" with the corresponding
plus/minus key
.
●
If necessary, enter the access code, see Chapter
11.04.01 Entering the access code
in
the instruction manual.
●
Move cam switch
1
by hand and check the ON/OFF switch position on the display.
●
Adjust support
2
(screws
3
) and cam switch
1
(screws
4
) in accordance with the
requirement
.
●
Switch off the machine.
1
2
3
6
5
4