63
CIRCULAR SAW TLC 800/900/1000/1200 vertical
MAX 15 mm.
T
Chapter 15
ROUTINE MAINTENANCE
(P.T.O. VERSION)
WARNING:
Before every adjustment and maintenance operation to be sure that
the current is disconnected (electric engine). Stop the tractor’s
engine (PTO).
15.3 Adjustment of the tension of the
pumps set’s belts
N.B. Disconnect the current rotating
the general switch in the position 0.
Close the switch.
■
Disassemble the carter on the back side of
the machine.
■
Check the tension of the belts pressing
with your hand. If the belt low itself more
than 15 mm. you must adjust the tension
■
Loose the screws (A) of the pumps support
bracket
■
Loose the nut (B)
■
Screw the nut (C) and adjust the tension.
■
Close the nut (B)
■
Block the pumps support screwing the two
screws (A) on the bracket
B
A
C
PTO VERSION
A
B
C
ELECTRIC
ENGINE VERSION
Summary of Contents for TLC 1000
Page 2: ......