47
CIRCULAR SAW TLC 800/900/1000/1200 vertical
2
Chapter 13
(control unity for cut)
USE OF THE MACHINE
CALIBRATION IN THE CASE OF NECESSITY
Insertion of the parameter LT
The difference between the noted part and the
measured part (+20 ) must be inserted to
correct the parameter LT before inserted.
Press the key PGM till when on the display
appear LTO 1000.
Change the values in L T01020 with the keys
A and B
Press the key ENTER for the confirmation.
Example: noted length by the instrument = 1980
measured length = 2000
Press PGM till when on the display appear
L T 0 1 0 0 0
In this case the difference between the noted
part and the measured part is negative
1 9 8 0 – 2 0 0 0 = - 2 0
1 0 0 0 – 2 0 = 9 8 0
Change the value in L T 0 0 9 8 0 with the
keys A and B
Press the key ENTER for the confirmation.
0 0 0
B
A
L
T 0 1
0 2 0
B
A
L
T 0 1
0 0 0
L
T 0 1
9 8 0
L
T 0 0
Summary of Contents for TLC 1000
Page 2: ......