WORKING ON THE ABS/PBS SYSTEM
Page : 44
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
- Ensure that the fluid level in the master cylinder does not drop below the pipe connecting with the control
unit reservoir
- Stop the operation when there are no more bubbles in the transparent pipe
- Close the bleed screw
- Turn off the ignition
- Disconnect the transparent pipe by clamping the other end to stop the fluid running out
- Check the brake fluid level in the master cylinder and top up if necessary.
Important
: The brake fluid level in the master cylinders in the horizontal position must always be above the
sight gauge level.
- Check the brake fluid level in the control unit reservoir and top up if necessary.
- Refit the master cylinder cover
- Check the levers are firm
- Using the diagnostic tool, operate the control unit pump and exert a high pressure on each of the levers to
ensure they are operating correctly
