WORKING ON THE ABS/PBS SYSTEM
Page : 42
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
Important:
It is essential to avoid being under the
master cylinder during bleeding to avoid brake
fluid splashes
- Operate the brake lever
evenly and smoothly
whilst topping up the fluid in the master cylinder
- Stop when there are no more bubbles coming from the caliper bleed screw
- Close the bleed screw
- Disconnect the pipe connecting it to the recipient
- Check the lever is firm without operating the lever violently to prevent brake fluid splashes
Note:
If the lever does not feel sufficiently firm, repeat the circuit bleed operation.
- Operate the brake lever again slowly to check there are no more bubbles in the circuit
- Check the brake fluid level in the master cylinder, top up if necessary and fit the cover
- Re-fit the bleed screw cap
