WORKING ON THE ABS/PBS SYSTEM
Page : 23
Reproduction or translation, even partial, are forbidden without the written consent of Peugeot Motocycles
3.
Fault code 15: PIN code error
Using the diagnostic tool
read off the PIN codes in
the ECU memory
YES
The harness PIN code is
the one for the machine
NO
The ECU PIN code
is the one for the
machine
NO
Machine not to spec.
check machine
history and return to
spec.
YES
The harness PIN code is
part of the PIN codes
authorised for this ECU
NO
Control unit
does not
conform
Change
control unit
YES
YES
Erase the ECU PIN code
with the diagnostic tool,
cut off the ignition and
turn it on again
Erase the fault codes and
check that they do not re-
appear
Note:
The control unit is
not the original check
machine history
Check the control
unit harness
- Check the
condition of the
connectors and
contacts
Check the coding
terminals are
correctly connected
(19, 20, 22)
