15-03-2004
15-03-2004
34
35
YOUR 307 SW IN DETAIL
RADIO
Notes on radio reception
Your car radio is subject to phenom-
ena which do not affect domestic
radio sets. Both AM (MW/LW) and
FM reception are subject to various
forms of interference. This is no re-
lection on the quality of the equip-
ment, but is due to the nature of the
signals and the way in which they are
transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of increasing distance from the trans-
mitter, delection of the signals by
obstacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When
"FAD"
is displayed, press but-
ton
I
or
J
.
Button
I
increases the volume in the
front.
Button
J
increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When
"BAL"
is displayed, press but-
ton
I
or
J
.
Button
I
increases the volume on the
right-hand side.
Button
J
increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons
I
or
J
to switch the
function on or off.
Audio RB3:
press the
"SRC"
button
several times in succession.
Audio RD3:
press button
R
.
Audio RB3:
briely press the
"BND/
AST"
button to select
the FM1, FM2, FMast
and AM wavebands.
Audio RD3:
briely press button
R
to select the FM1, FM2,
FMast and AM wave-
bands.
