146
15-03-2004
147
15-03-2004
PRACTICAL INFORMATION
F
Turn the protective cover corre-
sponding to the faulty bulb a quar-
ter of a turn and remove it.
F
Disconnect the connector.
F
Press the end of the securing clip
to free it. Change the bulb.
F
When itting the new bulb, ensure
that the direction notches are po-
sitioned correctly and the securing
clip is ixed properly.
F
Reconnect the connector.
F
Reit the protective cover, posi-
tioning it with the arrow upwards,
then turn it a quarter of a turn to
the right.
The headlamps are itted with poly-
carbonate glass with a protective
coating.
Do not clean them with a
dry or abrasive cloth, nor with a
detergent or solvent product.
Use
a sponge and soapy water.
4
- Side lights (W 5 W).
F
Pull the socket rearwards, remove
the bulb and change it.
5 - Direction indicators
(PY 21 W amber).
F
Turn the bulb holder a quarter of a
turn and remove it.
F
Change the bulb.
Note:
In certain climatic conditions
(low temperature, humidity),
con-
densation inside the headlamp
glass is normal
; it disappears a few
minutes after the lights are switched
on.
CHANGING A BULB
Front lights
Note:
on the right-hand side, remove
the style cover, ixed with two plastic
screws, to access the bulbs. Handle
the bulbs with a dry cloth.
1 - Dipped beam headlamps
(H7-55 W).
2 - Main beam headlamps
(H1-55 W).
3 - Front fog lamps
(H1-55 W).
