15-03-2004
15-03-2004
36
37
YOUR 307 SW IN DETAIL
Manual station search
Press the
"MAN"
button.
Briely press button
L
or
N
to in-
crease or decrease the frequency
displayed.
By continuing to press the button
in the direction selected, you will
obtain continuous scrolling of the
frequency.
The scrolling stops as soon as the
button is released.
Pressing the
"MAN"
button again
returns you to automatic station
search.
Automatic storing of FM stations
in the memory (autostore)
Your radio automatically stores the
6 stations with the strongest signal in
FM
. These stations are stored in the
FMast waveband.
If it is not possible to ind 6 stations,
the remaining memories are empty.
Automatic station search
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons
"1"
to
"6"
for more than two seconds.
The sound stops then becomes audi-
ble again, conirming that the station
has been stored in the memory.
Audio RB3:
press and hold the
"BND/AST"
button for
more than two seconds.
Audio RD3:
press and hold button
R
for more than two
seconds.
Recalling stations stored in the
memory
For each waveband, briely press
buttons
"1"
to
"6"
to recall the cor-
responding station.
Briely press button
L
or
N
to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
The scrolling stops at the irst sta-
tion found as soon as the button is
released.
If the
TA
trafic programme is select-
ed, only stations broadcasting this
type of programme are selected.
Searching for a station occurs irst
in
"LO"
sensitivity (selection of the
most powerful transmitters) during
scanning of the waveband, then in
"DX"
sensitivity (selection of the
weakest and most distant transmit-
ters).
To make a direct search in
"DX"
sen-
sitivity, press button
L
or
N
twice.
