128
15-03-2004
129
15-03-2004
YOUR 307 SW IN DETAIL
CRUISE CONTROL / SPEED
LIMITER*
Limiter function:
this prevents the
vehicle speed exceeding the speed
programmed by the driver (minimum
speed of 18 mph (30 km/h)).
The operations must be carried
out with the engine running.
Selecting the function
F
Place switch
1
in the
LIMIT
posi-
tion. The limiter is not yet active.
By default the display indicates:
Contact a PEUGEOT dealer to have
the system checked.
Switching the function off
F
Place switch
1
in position
0
or
CRUISE
or switch off the ignition
to switch the system off. The last
speed programmed remains in the
memory.
Memorising a speed
A speed can be memorised without
activation of the limiter.
A brief press on buttons
2
and
3
decreases or increases by 1 mph
(1 km/h). An extended press de-
creases or increases the memorised
speed progressively.
Activation / deactivation of the
limiter
Pressing button
4
activates the lim-
iter, pressing this button again deac-
tivates it.
When the limiter is active, the display
indicates (e.g. at 70 mph (110 km/h)):
Exceeding the programmed
speed
Pressing the accelerator to exceed the
programmed speed will have no ef-
fect unless the pedal is pressed irmly
(passing the
point of resistance
).
The limiter is deactivated temporarily
and displays the speed which lashes
(e.g. at 70 mph (110 km/h)):
To re-activate the limiter, release the
accelerator to slow down to a speed
below the programmed speed.
Note:
sometimes (on a steep de-
scent), the limiter may not prevent
the vehicle from exceeding the pro-
grammed speed, this speed lashes.
Operating check
In the event of a limiter malfunction,
the memorised speed is erased, the
dashes lash for a few seconds:
* During the year, according to
engine.
