PEUGEOT 208 Handbook Download Page 54

Page: 54 / 357

Indicators

208_en_Chap03_Indicateurs_ed01-2015

Instrument panel dimmer

Two buttons

With the exterior lighting on:

One button

Press this button to

increase the brightness.

Press this button to

adjust the brightness,

Press this button to

reduce the brightness.

release the button when the desired level is

reached.

As soon as the lighting reaches the required
level of brightness, release the button.

Operation

System for the manual adjustment of the
brightness of the instrument panel and the
touch screen to suit the ambient light level.

With the vehicle lighting off or in day
mode (daytime running lamps on),
pressing the button has no effect.

Summary of Contents for 208






































































































































































































































































































































































Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands

PEUGEOT 208, Handbook

Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands