PEUGEOT 208 Handbook Download Page 112

Page: 112 / 357

Driving

110

208_en_Chap05_conduite_ed01-2015

Mirrors

Door mirrors

Adjustment

Interior controls

Electric controls

Move control

to the right or to the left to

select the corresponding mirror.

Move control

in all four directions to

adjust.

Return control

to the central position.

Pressing the central symbol on control

folds the mirrors.

Pressing again unfolds them.

Adjustment

Manual controls

Operate the lever in the four directions to

adjust the angle of the mirror glass.

Fold the mirror manually to protect it when

the vehicle parked.

Unfold it before moving of again.

They are not fitted with automatic heating.

As a safety measure, the mirrors should
be adjusted to reduce the blind spot.

Summary of Contents for 208






































































































































































































































































































































































Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands

PEUGEOT 208, Handbook

Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands