PEUGEOT 208 Handbook Download Page 206

Page: 206 / 357

Practical information

204

208_en_Chap08_Informations-pratiques_ed01-2015

Switch off the ignition.

Secure the speed limit sticker inside the

vehicle.

Procedure

Repair

Uncoil the pipe stowed under the

compressor.

Connect the pipe from the compressor to

the sealant cartridge.

Turn the the sealant cartridge and secure it

in the cut-out provided on the compressor.

Avoid removing any foreign bodies
which have penetrated into the tyre.

Remove the valve cap from the tyre to be

repaired, and place it in a clean area.

Connect the hose from the sealant

cartridge to the valve of the tyre to be
repaired and tighten firmly.

Summary of Contents for 208






































































































































































































































































































































































Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands

PEUGEOT 208, Handbook

Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands