PEUGEOT 208 Handbook Download Page 347

Page: 347 / 357

Driving

113

Electronic gearbox

5-speed

6-speed

Reverse.

Neutral.

Automated

mode.

Manual mode.

Reverse.

Neutral.

Automated

mode.

Manual mode.

Automated mode

This mode allows gear changing without action
by the driver.

Moving off

Lever at position

)

Press the brake pedal firmly.

)

Release the brake pedal and press

the accelerator pedal progressively.

)

Start the engine.

)

Place the lever at

If the engine does not start:
- If

is flashing in the instrument panel,

move the lever to position

then to

position

If the message

"Foot on the brake"

displayed, press firmly on the brake pedal.

The

position of the lever is indicated

in the display.

You can change from position

and from

at any time.

Summary of Contents for 208






































































































































































































































































































































































Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands

PEUGEOT 208, Handbook

Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands