PEUGEOT 208 Handbook Download Page 208

Page: 208 / 357

Practical information

206

208_en_Chap08_Informations-pratiques_ed01-2015

Checking and inflating

Place the switch in the "

" position.

Remove the kit.

Drive immediately for approximately

three miles (five kilometres), at reduced
speed (between 15 and 35 mph (20 and
60 km/h)), to plug the puncture.

Stop to check the repair and the tyre

pressure using the kit.

To check and if necessary adjust the tyre
pressures.

Remove the valve cap from the tyre and

place it in a clean area.

Uncoil the pipe stowed under the

compressor.

Screw the pipe onto the valve and tighten

firmly.

Check that the compressor switch is at the

" position.

Uncoil fully the electric cable, stowed under

the compressor.

Connect the compressor's plug to the

vehicle's 12 V socket.

Switch on the ignition.

Summary of Contents for 208






































































































































































































































































































































































Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands

PEUGEOT 208, Handbook

Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands