PEUGEOT 208 Handbook Download Page 133

Page: 133 / 357

Driving

131

208_en_Chap05_conduite_ed01-2015

Speed settings

Operation

Go to the main menu by pressing

the "

MENU

" button.

Select the "

Driving

" menu.

Select the secondary page.

Select "

Speed settings

Select the speed to be modified.

Press "

Modify

For safety reasons, the driver must
carry out these operations when
stationary.

Enter the new value.

Press on confirm.

Confirm to save the modifications and quit

the menu.

Use this button to select all speeds.

Use this button to deselect all
speeds.

This button restores the factory
settings.

Principle

The speed values applied by the speed limiter

"LIMIT"

and the cruise control

"CRUISE"

can

be saved (up to 5 different speed settings).

With the touch screen

Advice

Summary of Contents for 208






































































































































































































































































































































































Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands

PEUGEOT 208, Handbook

Search results

Summary of Contents for 208

Reviews:

Related manuals for 208

Brands by name

Popular brands