Seite 57 von 72
User Manual
Petwalk Solutions GmbH
10.2 HINGE BOLTS
Even though the petWALK door has built in hinge bolts and closures of the highest quality, they could wear off
over the years. The petWALK door has the same options to adjust the opening and closing mechanism just as
any other window or door. It could happen that the hinge bolts move upwards and loosen from the hinge. Check
regularly if the hinge bolts are well placed and push them downwards in case they need adjustment.
10.3 CLEANING AND CLEANLINESS
Regularly clean the petWALK door and remove any cat or dog hair, etc. The best cleaning results can be
achieved with a soft, lint-free, slightly damp cloth. Do not use any solvents, aggressive cleaning materials and
abrasive detergents. We recommend using a vacuum cleaner on the door‘s passageway.
If you use the tunnel variant, you can also clean the base plate with a soft, lint-free, slightly damp cloth. You only
need to clean the side panels and top panel with a dry cloth.
ATTENTION!
Never use too much water when cleaning the tunnel - water could soak into the
masonry.
10.4 CLEANING THE SENSORS
Regularly clean the sensors with a soft cloth, so that dirt cannot accumulate on the sensors. Dirty sensors can
limit their functionality. Pay special attention not to damage or break off the protective cap of the inner sensor
(picture on the left). The inner PIR sensor needs the cap to function properly.
Summary of Contents for petWALK
Page 1: ...User Manual VERSION 4 1...
