Seite 52 von 72
User Manual
Petwalk Solutions GmbH
8 POSSIBLE MALFUNCTIONS
8.1 RESETTING THE PETWALK PET DOOR - RESET
You can reset all settings on the petWALK pet door. This means that, should you not be able to remember what
exactly you‘ve set up and changed whilst trying out the door, you can easily reset the door and start over.
There are two reset options:
•
PAR - resets all settings apart from RFID collar tags that have been programmed
•
ALL - resets the petWALK pet door to the factory settings
8.1.1 Resetting your personal settings - PAR
If you want to reset all settings, but not erase the registered pets, proceed as follows: Press the
MENU BUTTON
twice in quick succession to access the programming mode. The display will appear as follows:
Using the
UP
and
DOWN
buttons, scroll until PAR is shown on the display. Press
OK
to confirm your
wish to reset all settings to the factory settings. The programmed RFID chips will remain untouched. You can
exit the setup mode by pressing the
OK
button, the
MENU BUTTON
or the
OPERATING MODE
button. The door will now be in standard operating mode and you can start to customise the settings again.
8.1.2 RESETTING TO FACTORY SETTINGS - ALL
Press the
MENU BUTTON
twice in quick succession to access the programming mode. The display will
appear as follows:
If ALL is not shown in the display, use the
UP
and
DOWN
buttons to scroll until ALL is shown on the
display. Press
OK
to confirm your wish to reset all settings to the factory settings. You will hear an acoustic
confirmation of a successful reset in the form of a beep. You can exit the setup mode by pressing the
OK
button, the
MENU BUTTON
or the
OPERATING MODE
button. The door will now be in standard
operating mode and you can start to customise the settings again.
8.1.3 MANUAL RESET
In very rare cases, the petWALK pet door might at some point suffer a software crash and become unresponsive.
Just like in a computer, a simple restart can often solve the problem.
The petWALK pet door has to be RESET by disconnecting it from the power supply and letting the battery run
out. This is easily achieved by disconnecting the petWALK pet door from the power supply (unplug the power
adapter from the power outlet) and waiting a number of hours until all of the lights on the display are unlit. After
that, the power adapter can be plugged in to the power supply again and the petWALK pet door will function
normally again.
If you need a quicker alternative to restart the petWALK pet door, follow this procedure:
Summary of Contents for petWALK
Page 1: ...User Manual VERSION 4 1...
