Seite 28 von 72
User Manual
Petwalk Solutions GmbH
4.2.3 MEANING OF THE (REMOTE) CONTROL SYMBOLS
OPERATING MODE
With this button, you can switch your petWALK pet door ON (green) or OFF (red)
EXIT CONTROL
When pressed, the symbol glows green, the inner motion sensor is activated and your pet is
allowed out. When pressed again, the symbol is no longer lit - this means: your pet is not allowed
out anymore.
ENTRY CONTROL
When pressed, the symbol glows green, the outer motion sensor is activated and your pet is allowed
in. When pressed again, the symbol is no longer lit - this means: your pet is not allowed in anymore.
OPEN / CLOSE DOOR
When pressed, the petWALK pet door opens and the symbol glows green. When pressed again,
the door closes again. If you forget to close the door manually, the petWALK pet door closes itself
automatically again after about 30 minutes.
ACCESS CONTROL
When pressed, the symbol glows green, RFID recognition is activated and the petWALK pet door
only opens for authorised animals with a preregistered RFID chip. When pressed again, the symbol
is no longer lit and the petWALK pet door is once again opened and closed by the motion sensors.
TIME CONTROL
When pressed, the set time program is activated. The display symbol glows green. When pressed
again, the time program is deactivated and the symbol is no longer lit.
BRIGHTNESS CONTROL
When pressed, the light sensor is activated and controls the door. The display symbol glows green.
When pressed again, the function is deactivated and the symbol is no longer lit.
WEATHER CONTROL (no longer available)
When pressed, the optional rain sensor is activated and controls the door. The display symbol
glows green. When pressed again, the function is deactivated and the symbol is no longer lit. If you
press this button whilst there is no rain sensor attached, the symbol flashes red. When pressed
again, you exit this mode.
MENU / SETUP BUTTON
Press the menu button once to access setup mode. Press the button twice within 2 seconds (if
you find it hard to enter this menu, try again with your „weaker“, usually left hand) to access the
programming mode.
UP BUTTON
Increases values in setup mode and programming mode.
OK BUTTON
Pressing OK confirms and saves a value you have entered.
DOWN BUTTON
Decreases values in setup mode and programming mode.
Summary of Contents for petWALK
Page 1: ...User Manual VERSION 4 1...
