PESA Cheetah 1024x256, Manual

Page: 215 / 235

C
HEETAH
S
ERIES
S
WITCHERS
– A
PPENDIX
A
81-9059-0570-0 Rev. C
Proprietary Information of PESA S
WITCHING
S
YSTEMS
, I
NC
. 200
Help on how to change one of these settings can be obtained by entering the command 'HE ET' (for
Help Ethernet) at the '>' prompt. For example,
>he et
Syntax: ET < DHCP [ON|OFF] | IP [addr] | GW [addr] |
: SN [addr] | DP [port] | TN [ON|OFF] |
: TP [tport] | TL [pass] | RCOMM [str] |
: WCOMM [str] | TCOMM [str] | TRAP [ON|OFF] |
: AUTH [ON|OFF] | TARGET [addr] | NP [MASTER|SLAVE] >
Where : DHCP ON enables client automatic IP address negotiation.
: IP [addr] allows you to set the IP address of the PMFC.
: GW [addr] allows you to set the gateway address.
: SN [addr] allows you to set the subnet mask.
: DP [port] allows you to set the NETPRC IP port.
: TN ON enables the on-board telnet server.
: TP [port] allows you to set the telnet port.
: TL [pass] allows you to set the telnet login password.
: where addr is in dotted notation (ex. 192.168.1.1}.
: where port is in the range [1000...65535].
: where tport is in the range [23,1000...65535].
: RCOMM [str] allows you to set the SNMP read community string.
: WCOMM [str] allows you to set the SNMP write community string.
: TCOMM [str] allows you to set the SNMP trap community string.
: TRAP ON enables SNMP traps.
: AUTH ON enables authentication traps.
: TARGET [addr] allows you to set the trap target IP address.
: NP [MASTER|SLAVE] sets the NETPRC type of the PMFC.