PESA Cheetah 1024x256, Manual

Page: 174 / 235

C
HEETAH
S
ERIES
S
WITCHERS
– C
HAPTER
11
81-9059-0570-0 Rev. C
Proprietary Information of PESA S
WITCHING
S
YSTEMS
, I
NC
. 159
11.8.2 MFC 8-Character Display
An eight-character display (see Figure 71) is located on the front of the matrix frame controller.
Page
number
Message
display
88888888
FIGURE 71: 8-Character Display
The display is divided into two fields. The first character on the far left is the first field indicating the
page number of the information being displayed. The next seven characters is the second field that
indicates the actual message.
Press the “Scroll” button to view successive pages. Each page will appear for 30 seconds, then reset
to page 0. Descriptions of the displayed messages are detailed in Table 35.
TABLE 35: 8-Character Display Messages
P
AGE
M
ESSAGE
D
ESCRIPTION
0
ACTV OK
STDB **
SNGL OK
SNGL **
Describes which frame controller is active, standby, or single operation. It also
indicates whether there is an alarm condition present on the controller.
1
IN XXXX
Shows the number of inputs being controlled by the frame controller.
2
OUTXXXX Shows the number of outputs being controlled by the frame controller.
3 IOFXXXX Shows the input offset of the matrix.
4
OOFXXXX Shows the output offset of the matrix.
5
STRB XX Shows the PRC strobe of the matrix.
6
TEMP OK
TEMPBAD
Shows the alarm status of the over temp indicator.
7
PWR OK
PWR BAD
Shows the alarm status of the power supply.
8
FAN OK
FAN BAD
Shows the alarm status of the fan circuit.
Table continued on next page