PERODUA ALZA, Owner'S Manual

Page: 464 / 508

14–18
If the oil level is satisfactory, reinstall the filler
plug with new gasket interposed and tighten
it securely.
Tightening torque: 29.4 - 49.0 N.m
(21.6 - 36.1 ft-lb, 3.0 - 5.0 kgf-m)
When the oil level is low, add the specified oil
until it starts to flow out the filler hole.
For recommanded manual transmission oil,
see section 17. Reinstall the filler plug with
new gasket interposed and tighten it securely.
Tightening torque: 29.4 - 49.0 N.m
(21.6 - 36.1 ft-lb, 3.0 - 5.0 kgf-m)
4. Pull the dipstick out and check the fluid
level to see if it is within the “HOT” range.
5. If the oil level is too low, add the specified
fluid through the oil filler tube slowly. Do
not overfill.
For recommended automatic transmission
fluid, see Section 17.
6. Securely insert the dipstick.
7. Wipe off any spilt fluid.
CAUTIOR
• If the fluid is dirty, have the fluid changed
by an authorized Perodua Service
Centre.
• If the fluid level is too low, or if fluid
decreases noticeably, have the system
checked by an authorized Perodua
Service Centre.
COLD
HOT
H C
PERINGA
TAN
WARNING
JANGAN DIBUK
A WAKTU P
ANAS
NEVER OPEN
WHEN HO
T
WAARIRNG
w
• Be careful not to burn yourself as
the fluid may be hot.
• Rever touch or come close to the
moving parts while the engine is
running, to help reduce the risk of
serious bodily injury.
Check the fluid level when the transmission
fluid temperature is 70 - 80
0
C.
If the vehicle has been driven for about 15
minutes at a speed of 60 km/h or for about
30 minutes at a speed of 40 km/h, the fluid
temperature becomes about 70 - 80
0
C.
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine at idling speed and firmly
depress the brake pedal. Move the shift
lever from
H
to
L
smoothly and return
to
H
.
3. Pull the dipstick out and wipe it clean.
Insert it into the original position.
Automatic transmission fluid level
check
Sect 14 EN.indd 18 13/04/2018 12:19 PM