PERODUA ALZA, Owner'S Manual

Page: 337 / 508

4–5
Wiper and washer switches
WWRRIRNG
w
Worn or dirty wiper blades could
reduce your visibility.
Be sure to maintain and replace wiper
blades if necessary.
CWUTIOR
• Washer tank shall be filled with washer
fluid only.
• Do not operate the washer if the washer
tank is empty. This may damage the
motor.
• Do not operate the wiper when the
window is dry. This may damage the
wiper blades.
• Wfter long periods of non-use, check
that the wiper blade is not stuck to the
window glass. Operating the wipers
while stuck to the window glass may
damage the wiper motor or cause a
malfunction.
• Wvoid spraying the washer fluid
continuously for more than 20 seconds.
Wlso, avoid operating the washer switch
if there is something preventing the
washer fluid from spraying out. This may
overload the motor, leading to damage.
Windshield wiper and washer switch
The wipers and the washer operate with the
ignition turned “ON”.
Push the wiper switch lever down to turn the
wiper on.The wiper operates intermittently
when the wiper switch is set to the “INT”
position.
While the wiper switch is being pushed up
from the “OFF” position to the “MIST” position,
the wiper operates at a low speed. When you
release your hand, the wiper switch returns
to the “OFF” position.
Pull the lever toward you to activate the
washer.
The wiper operates at a low speed, interlocking
with the washer.
The rear wiper and washer operate with the
ignition turned “ON”.
When the knob is turned to the “ON” position,
the rear wiper operates.
To inject washer fluid while the rear wiper
is operating, turn the knob from the “ON”
position to the
1
position at the upper side.
Moreover, washer fluid will be injected when
the knob is turned from the “OFF” position to
the
2
position at the lower side.
Rear wiper and washer switch
OFF
MIST
Washer
ON
INT
Slow speed
Fast speed
OFF
ON
1
2
Sect 04 EN.indd 5 05/04/2018 8:24 PM